Simcenter Flomaster는 20년이 넘는 세월동안 pipework network와 system의 1D 열유체 시뮬레이션을 위해 엔지니어들에게 선택되어 사용되었습니다.
Don Miller의 "Internal Flow Systems"를 기반으로 하는 Flomaster는 뛰어난 transient solver로 인해 정확성, 유연성 및 다양한 업계에서 사용가능한 점이 여러 엔지니어들의 선택을 받게 되었습니다.
Flomaster는 설계 프로세스의 초기 단계부터 신뢰할 수 있는 결과를 제공합니다.
Simcenter Flomaster 의 강점
열유체 시스템의 개발 시간과 비용을 절감.
고급 열유체 시스템 모델링 및 시뮬레이션을 통해 사용자는 실제 상태를 분석.
다용도 Transient Solver.
1D-3D Simulation은 이전 데이터가 존재하지 않거나, Flomaster 네트워크의 일부로 간주할 수 있는 긴밀하게 결합된 3D CFD 모델을 Co-Simulation 워크플로우(OneSim)가 있는 1D 구성요소에서 사용할 수 있도록 3D Component를 특성화할 수 있음.
전용 CAD Import Tool을 사용하여 CAD 데이터를 Flomaster로 원활하게 이동.
안전하게 데이터를 추적해 설계 협업을 함으로써 사용자가 필요한 경우 언제든지 복잡한 설계를 분석.
Model the complexity
Model two phase flows with Conjugate Heat Transfer
Understand volumes of liquid and gas from relative velocities and void fraction (drift flux model)
Two pipes. Either Heat from two sides of from internal tubes
Two phase pipe with 1D HT
Model heat exchange from internal tubes
Model compact plate-fin heat exchangers with the new modular heat exchanger components
Preconfigured three channel component supplied
Build alternative configurations using the new Plate Fin Channel Component for full flexibility
Transfer heat between passes using 1D HT
Plate Fin Channel
Plate Fin
Heat Exchanger
Configured 3.
channel heat exchanger
New two-phase fluids added
Reduce the time to define systems with predefined two-phase fluids
Model systems with
Ammonia,
Hydrogen,
LPG and
CO2
C02 data form
Property definitions
Physics enhancements
Include the effects of cavitation in priming simulations with auto vaporization now enabled for nodes that have primed enabling pressure pulsations to be more accurately tracked
Model entry impulse in gas turbine cavities
Cavitation at nodes in priming simulations
Comparison of results with and without entry impulse
Explore the possibilities
Collections can now be saved
Collections can be loaded or deleted
A saved collection can be used to group common components for edit commands, examples would include pipes of a common diameter, components in a given circuit or a group of components for result processing
Collections persist across pack\unpack and network copy
Save and review collections
Adding the collection to the window
Automatically add boundaries to a composite when it’s extracted from a network leaving the composite in a runnable state without user intervention
Replace the components in the network with the composite automatically to reduce visual complexity and encapsulate sections of a network
Use input and output parameters to define the composite data form to speed composite data form building
Automatically add composite
Boundaries automatically added
Design your own n-arm data form for flexible component design
Use subforms to group data
Use segmentation in N-Arms for components with length
Defining a N-Arm data Form
Segmented along n-arm length
Better visualize temperature with solid bars components displaying temperature with length
Build components with the new component customization form
Quicker Simulations through concurrent simulation of component models
Component customization
Solid Bar visualization of temperature
Debug messages for Controllers, CAMs & N-arms
Go faster
Simcenter Flomaster
New ribbon-based interface allows commands to be found quicker with new icons for better recognition of functions
Wizards embedded into Launchpad
New ribbon based interface
Embedded wizards
Simcenter Flomaster 2022.1
Component concurrency
Analyses systems in less time with component concurrency
Optionally specify the degree of parallelism used by the simulation
Auto parallelism selection based on network size and processor
Quicker simulation
[Upto 30% reduction in simulation time]
Better utilization of available resources
Stay integrated
MQTT Connector
Provides you with the ability to monitor physical assets with the increased insight of a full fidelity executable digital twin
Enables Simcenter Flomaster to connect to Mindsphere or interface with any MQTT compliant product/ device
Customers are provided with a complete xDT solution with Simcenter Flomaster as an integral component
MQTT connector in Simcenter Flomaster
Connectivity to Siemens Visual Flow Creator dashboards
Connection to PLC's
Enhanced the existing OPC UA connectors to see more data types
This enables you to see data in all data blocks and connect to more variables
In doing so you don't need to change your PLC code to form a connection with Simcenter Flomaster
OPC UA connection wizard enables you
to connect to data types
More results are visible
and instanced data blocks can now be accessed
Build networks that are easier to work with using CAD2FM in Simcenter Flomaster 2022.1
Reductions in overlapping components
Enhanced pipe and node spacing
Pre 2022.1
In 2022.1
Toggle result writing on/off with the Result Writing Component to reduce overheads for connected simulation runs
Identify simulation bottle necks using the Run time statistics controller to help models run quicker
Result Writing Component
Run Time statistics